Home > > FAQ
  • Why change the valve when changing tires?

    2019-07-17 17:10:05
    In the long-term operation and high-speed operation of the automobile, there are often some failures, such as anchoring, car puncture, component damage, etc. When these faults occur, they can be properly maintained and maintained during normal use. Regular maintenance to reduce the occurrence of faults.
  • What is the advantage of nitrile gloves, how to choose nitrile gloves correctly

    2019-07-17 17:05:04
    Disposable nitrile gloves are gloves made of different synthetic rubbers. It does not contain any latex protein and has excellent abrasion resistance. Nitrile gloves are more resistant to puncture than many other types of rubber gloves and can be used to combat corrosion from many types of chemicals. Nitrile gloves are often considered to be the strongest type of disposable gloves, and nitrile gloves are the best choice for those who are allergic to latex.
  • Where should the car jack be placed?

    2019-07-17 16:58:23
    Where should the car jack be placed? Xiaobian analysis is as follows;The jacks equipped with the car are respectively supported on the metal ribs on the lower side of the left and right sides of the vehicle. There are grooves or triangular marks on the metal ribs. Of course, the insurance method is to check the manual of the vehicle, which will detail the jack. Use method and vehicle safety support location.
  • Car jack, do you really use it?

    2019-07-17 16:52:13
    Vehicle puncture is a very troublesome thing. Many people know that they need to use the on-board tool-jack to replace the spare tire, but many drivers don't know how to use it accurately. Today, Xiaobian will teach you how to use it accurately jack.
  • Introduction of tire repair strips

    2019-07-17 16:24:25
    The tire patch is a strip of colloid used to bond, repair or glue the tire to the tread.The role of the tire-filling strip: the unique cold-resistant and heat-resistant process formula, with excellent air-tight performance, so that the repaired tire can adapt to various road environments around the clock, effectively improve the wear rate and service life of the tire retreading, and at the same time Refurbished tires and beautiful.
  • How to repair tires with film

    2019-07-17 16:18:58
    1. Clean the holes with an air mold grinder. Choose a tip that will fit the hole in which it leaks. This will roughen the sides and clean the area so that the patches will bond properly when installed.2. Replace the drill bit on the mold grinder with a grindstone drill bit. Spray "Pre-Buff Cleaner" on the inside of the tire and the patch will be installed.
  • Método de correspondência, uso e instalação do equipamento de garantia de bloco de equilíbrio tipo gancho

    2019-07-17 16:06:44
    Nos últimos anos, devido ao aumento acentuado na posse de automóveis, e a garantia de pneus foi incorporada na empresa de manutenção de automóveis, os regulamentos de gestão de abertura, o calor do mercado de manutenção e manutenção do bloco de ferro ligado ao ferro está gradualmente aquecendo.
  • The importance and standard of the adhesive balance block in the car driving

    2019-07-17 15:59:35
    The sticking weights of each wheel vary in size, but there must be a sticking weight. Some of the wheel's adhesive weights are on the outside of the wheel, but most of the wheel's adhesive weights are on the inside of the wheel, making it difficult to find the adhesive weight from the outside.
  • Valve maintenance method and sealing

    2019-07-17 15:51:06
    The valve body has a valve core acting on the one-way valve, and the inner hole of the valve is closed by a valve cap from the outside to prevent the inner hole of the main body from being clogged and the inner tube leaking. For the valve cap of the metal valve, the wrench can be screwed in and out of the valve core. In addition, the metal type, the valve is also equipped with a bridge pad and a compression nut to improve the bonding strength of the inner tube and the valve.
  • Installation and selection of car balance block

    2019-07-17 15:28:41
    The car balance block is a counterweight component on which the vehicle is mounted on the wheel. The function of the counterweight is to keep the wheel in dynamic balance under high speed rotation. The quality of any part of the object itself is different. Under static and low-speed rotation, the uneven quality will affect the stability of the rotation of the object. The higher the rotation speed, the greater the vibration.
  • What are the methods for repairing tires?

    2019-07-17 15:19:59
    Common tire repair methods using tire repair tools to repair tires:According to the usual work experience, the tire repair method for bad tires can be roughly divided into three types according to the degree of tire damage: cold (internal or paste), hot (commonly known as fire) and rubber strip.
  • Is it necessary to buy a car emergency start power supply?

    2019-07-17 11:14:08
    Is it necessary to buy a car emergency start power supply? This topic has been debated by car enthusiasts since the advent of the car emergency start power. In fact, there is no need to buy a car emergency start power, there are two points to consider, one, look at the car conditions; Second, look at the itinerary.
  • What to pay attention to when using a car jack!

    2019-07-17 10:53:11
    When traveling, it is inevitable that there will be accidents in the car. Whenever the car is in an accident, the most used is the jack. The jack is one of the most commonly used powerful parts.When using a jack, pay attention to the following points:When the vehicle is jacked up, the engine must never be started, because the vibration of the engine or the rotation of the wheel will cause the vehicle to slip from the jack and cause danger.
  • Under what circumstances need to replace the inner tube valve

    2019-07-17 10:35:42
    In the process of using the inner tube valve, there may be cases where the device is preferred to be repaired, and even some devices may not be repaired because the damage is serious, or the difficulty and cost of repair are too large, and it is necessary to replace the new device. To use. For example, in the following cases, you need to replace the new device instead of repairing the device:
  • How to use the paste balance block correctly

    2019-07-10 10:31:00
    The sticking weight is a kind of balance block that is used more often. What is the usage method? Let us introduce it below:1. After cleaning the hub, place the balancer on the hub and check that the curvature of the hub is suitable for the balance weight. When the balance weight is placed, the protective film of the back strip remains. The radius of the balance block curvature should be at least parallel to the radius of the hub.
Um por favor Z eu louco torre, ying will district, Uma cidade jovem, um willprovince
Call us:+86-15505083202